- Видео 261
- Просмотров 737 142
SIDECUT
Канада
Добавлен 14 фев 2007
SIDECUT focuses on creating the easiest and most efficient to use Tuning Products & Tools ensuring your skis and boards perform at their absolute best. Having the highest quality tools enables you to not only improve your skills on the tuning bench faster but more importantly on snow. Tested and designed by athletes and coaches, all of our tools are put through their paces before we sell them to the public. We believe you should buy tools once so that's how we engineer them. Our products are suitable for all beginner to expert technicians.
Warning: Learning how to tune your own skis will dramatically improve your on-snow skills which will lead to way more fun!!
Ski & Ride your best! www.sidecut.com
Warning: Learning how to tune your own skis will dramatically improve your on-snow skills which will lead to way more fun!!
Ski & Ride your best! www.sidecut.com
Diamond Guide Quick Release Spacer options - Valuable Tuning Tip #24
ValuableTuning Tip #24
This video demonstrates the different 'spacer' options for the Diamond Guide 'Quick Release System'. These spacers impact different gripping styles and hand sizes. The 'QRS' method will allow you to change SIDECUT Diamond Discs in a fraction of the time which will no doubt speed up your tuning sessions.
Link to the product:
@sidecuttuning
View our ski tools & waxing products here:
www.sidecut.com
SIDECUT Tuning Exists to:
► Enlighten, inspire you to tune your skis & snowboards
► Enable you to increase your enjoyment on snow by teaching you how to tune your own gear
► Design the highest quality tuning tools & provide knowledge enabling snow sport enthusiasts to reach thei...
This video demonstrates the different 'spacer' options for the Diamond Guide 'Quick Release System'. These spacers impact different gripping styles and hand sizes. The 'QRS' method will allow you to change SIDECUT Diamond Discs in a fraction of the time which will no doubt speed up your tuning sessions.
Link to the product:
@sidecuttuning
View our ski tools & waxing products here:
www.sidecut.com
SIDECUT Tuning Exists to:
► Enlighten, inspire you to tune your skis & snowboards
► Enable you to increase your enjoyment on snow by teaching you how to tune your own gear
► Design the highest quality tuning tools & provide knowledge enabling snow sport enthusiasts to reach thei...
Просмотров: 184
Видео
How to use the Diamond Guide 'Quick Release System' - Valuable Tuning Tip #23
Просмотров 3603 месяца назад
Valuable Tuning Tip #23 This video shows you how to use the Diamond Guide 'Quick Release System' and demonstrates the different options available for different gripping styles and hand sizes. The 'QRS' method will allows you to change SIDECUT Diamond Discs in a fraction of the time which will no doubt speed up your tuning sessions. Link to the product: @sidecuttuning View our ski tools & waxing...
Adjusting the 'D-glides' on your Pro Base Bevel Guide - Valuable Tuning Tip # 20
Просмотров 2103 месяца назад
In Valuable Tuning Tip # 20 we demonstrate how you adjust the “Delrin glides” on your Pro Base Bevel Guide when they wear. We’ve designed the glides to be rotated 4 times so they last a very long time before replacement is needed. Link to the product: www.sidecut.com/product/BBG_PRO.html @sidecuttuning View our ski tools & waxing products here: www.sidecut.com/product/DG_WC.html www.sidecut.com...
Smooth sidewalls = Free speed!! Valuable Tuning Tip # 19
Просмотров 4544 месяца назад
In Valuable Tuning Tip # 19 we demonstrate how you can turn average sidewalls into ultra smooth & fast sidewalls giving you what we call "FREE SPEED". Easy to do. Rewarding results. Link to the product: www.sidecut.com/product/FIBER_TEX_3PC_MIX.html @sidecuttuning View our ski tools & waxing products here: www.sidecut.com SIDECUT Tuning Exists to: ► Enlighten, inspire you to tune your skis & sn...
Changing the Bevel on your Pro Base Bevel Guide - Valuable Tuning Tip # 18
Просмотров 5214 месяца назад
In Valuable Tuning Tip # 18 we teach you how to change the 'glide plate' on our Pro Base Bevel Guide to your desired bevel 0.5, 0.7, 1.0 or 1.5 degrees. This means with only one Pro BBG you can easily switch to different degrees. Click the link on the reel to take you to the product. *Extra Glide Plates are sold individually.* Link to the product: www.sidecut.com/product/BBG_PRO.html (base beve...
Detuning Your Tips & Tails for Better Turns - Valuable Tip # 17
Просмотров 5254 месяца назад
In Valuable Tip # 17 we show you how to detune you tips and tails with what we call "AVS Detuning" (anti-vibration style). This method is used with a ceramic stone to redirect the sharpness not completely dull it. Dulling the tips and tails completely causes the skis to vibrate on harder snow surfaces which will affect your turns. You also have the option apply this method slightly more on your...
Losing Confidence On Ice? Try this! Valuable Tuning Tip # 15
Просмотров 7755 месяцев назад
In Valuable Tuning Tip # 15 we offer you an "idea" inspired by a World Cup/Europa Cup serviceman & his athlete who demanded “more grip” on the infamous Hahnenkamm WC downhill track. Creating a “tiny burr” or “hanger” on your edge using a Diamond Guide & 200 grit disc right under the binding section of your ski can increase your confidence on hard, super icy surfaces. Test it out to see if it wo...
Organizing your Diamonds, Stones & Files - Valuable Tuning Tip # 14
Просмотров 5785 месяцев назад
In Valuable Tuning Tip # 14 we outline the different SIDECUT Diamond Disc, Stone & File organizers so you can save space on your tuning bench. There's no bigger time waster then searching for that missing file or stone amongst the tools on your bench. The organizers also double as a great way to dry your stones, store & travel with them. Link to the product: www.sidecut.com/product/DFO_COMBO_LI...
Get the Smoothest edges with Elastik Stones - Valuable Tuning Tip # 12
Просмотров 1,1 тыс.6 месяцев назад
In Valuable Tuning Tip # 12 we show you an option to get ultra smooth edges that feel amazing on snow - using Tyrolit Elastik Stones. A must for serious tuners who can really feel these nuances on-snow. Link to the product: @sidecuttuning View our ski tools & waxing products here: www.sidecut.com/product/DG_WC.html www.sidecut.com SIDECUT Tuning Exists to: ► Enlighten, inspire you to tune your ...
The Easiest Way to Improve Your Turns - Valuable Tip # 11
Просмотров 9756 месяцев назад
In Valuable Tip # 11 we demonstrate what happens when you adjust the angle on a Base Bevel Guide by pivoting off the toe and the heel. This is why it's so important to keep both Delrin glides (D-glides) running on the sidewall/edge of the ski at all times unless you want to increase the base edge bevel on the tips and tails of your ski or board. Link to the product: www.sidecut.com/product/BBG_...
How to 'Wedge' a Diamond Disc on our Pro Base Bevel Guide - Valuable Tuning Tip # 10
Просмотров 5836 месяцев назад
In Valuable Tuning Tip # 10 we teach you how to use the 'Wedge' with a Diamond Disc on our Pro Base Bevel Guide. Link to the product: www.sidecut.com/product/BBG_PRO.html @sidecuttuning View our ski tools & waxing products here: www.sidecut.com/product/DG_WC.html www.sidecut.com SIDECUT Tuning Exists to: ► Enlighten, inspire you to tune your skis & snowboards ► Enable you to increase your enjoy...
How to 'Wedge' a Diamond Stone on our Pro Base Bevel Guide - Valuable Tuning Tip # 8
Просмотров 8927 месяцев назад
How to 'Wedge' a Diamond Stone on our Pro Base Bevel Guide - Valuable Tuning Tip # 8
Using your Topsheet Remover for Sanding - Valuable Tip # 9
Просмотров 7148 месяцев назад
Using your Topsheet Remover for Sanding - Valuable Tip # 9
Perfect Sidewalls trick #2 - Valuable Tuning Tip # 5
Просмотров 1,2 тыс.8 месяцев назад
Perfect Sidewalls trick #2 - Valuable Tuning Tip # 5
Tom Gellie - The Traveller's Tuning Kit
Просмотров 8798 месяцев назад
Tom Gellie - The Traveller's Tuning Kit
Protecting Your Tools - Valuable Tuning Tip # 4
Просмотров 5538 месяцев назад
Protecting Your Tools - Valuable Tuning Tip # 4
Sidewall Removal Trick #1 - Valuable Tuning Tip # 3
Просмотров 2,7 тыс.9 месяцев назад
Sidewall Removal Trick #1 - Valuable Tuning Tip # 3
Measuring your Bevels - Valuable Tuning Tip # 2
Просмотров 2,6 тыс.9 месяцев назад
Measuring your Bevels - Valuable Tuning Tip # 2
Tune Faster - Valuable Tuning Tip # 1
Просмотров 1,9 тыс.9 месяцев назад
Tune Faster - Valuable Tuning Tip # 1
Tune your Edges 'after' Waxing - Advanced Tuning Tip # 13
Просмотров 2,6 тыс.Год назад
Tune your Edges 'after' Waxing - Advanced Tuning Tip # 13
How to Scrape so you don't damage your structure - Advanced Tuning Tip # 12
Просмотров 2,5 тыс.Год назад
How to Scrape so you don't damage your structure - Advanced Tuning Tip # 12
Are you removing your 'structure' when you scrape? Advanced Tuning Tip # 11
Просмотров 3 тыс.Год назад
Are you removing your 'structure' when you scrape? Advanced Tuning Tip # 11
Scraping Wax off Uneven Bases - Advanced Tuning Tip # 10
Просмотров 1,7 тыс.Год назад
Scraping Wax off Uneven Bases - Advanced Tuning Tip # 10
Should you Grind Brand New Speed Skis? Advanced Tuning Tip # 9
Просмотров 1,9 тыс.Год назад
Should you Grind Brand New Speed Skis? Advanced Tuning Tip # 9
Can't Get Your Edges Sharp enough? Advanced Tuning Tip # 8
Просмотров 2,7 тыс.Год назад
Can't Get Your Edges Sharp enough? Advanced Tuning Tip # 8
How to make your Sidewalls Fast - Advanced Tuning Tip # 7
Просмотров 2,3 тыс.Год назад
How to make your Sidewalls Fast - Advanced Tuning Tip # 7
How to Remove your Top-Sheet - Advanced Tuning Tip # 6
Просмотров 2,9 тыс.Год назад
How to Remove your Top-Sheet - Advanced Tuning Tip # 6
How to Remove your Sidewalls - Advanced Tuning Tip # 5
Просмотров 2,8 тыс.Год назад
How to Remove your Sidewalls - Advanced Tuning Tip # 5
How to choose your Left vs. Right ski - Advanced Tuning Tip # 3
Просмотров 5 тыс.Год назад
How to choose your Left vs. Right ski - Advanced Tuning Tip # 3
Wax Brush sequence & technique (live version) - Advanced Tuning Tip # 4
Просмотров 5 тыс.Год назад
Wax Brush sequence & technique (live version) - Advanced Tuning Tip # 4
I use brass roto brush
When are these available? Not seeing them online yet but stoked to try it out (along with the diamond guide - hoping to order both the guide and QRS device)
Available for season 24/25.
awesome video
Thanks!
now thats a good instruction ! thanks a lot !
Thank you very much! Glad it was helpful.
I’ve been racing Nordic and waxing my own skis for 47 years but leave tuning of my alpine skis to the shop. I want to start tuning my own alpine skis. The issue that has scared me from tuning alpine skis is edge construction, bevel,etc. is there a diagram anywhere that describes edge angle ? Also, how can ski edges take frequent sharpening without eventually wear down to nothing? Stupid questions but they have caused apprehension in tackling my own tuning. Thanks
It’s scares most actually….but I’ve yet to meet anyone who has started and say they wish they hadn’t. It’s literally transformative to one’s experience on snow. Sure you need to learn it however the learning curve is extremely fast. Contact and we can help you out. And yes tuning the edges makes them thinner however for most skiers the ski wears out long before the edge wears out.
So what about my 122mm skis :(
In this case we grab the plate or plate under the AFD's with the centre vice.
And when you are finished the season y over😂
Tuning a new pair of skis takes approximately 1.5 to 2 hours due to set up shown in the video. After that daily ski day maintenance can be done in in 15mins.
thanks!
This is really helpful! I always had the problem that I got marks on the ski top and end with the sidewall remover. I just orderer the Topsheet Remover. I couldn't find it in Switzerland.
Great to hear!
What are the key differences between this and the Toko T18? Some people are guessing the T18 is made by Star? It looks like this one has digital temp adjustment buttons while the Toko T18 has a dial. Any major circuit controller differences?
You're best to reach out to them to get the specifics of their iron. You're correct that our iron has a touch pad to adjust the temperature. We have two options 15mm or 25mm soleplate, both poured solid aluminum and CNC machined flat for the best wax application.
Great, but how long will that last on ice & crud?
There's far too many variables at hand here to give you a duration in time. The 'idea' behind this tip is to 'test it our for yourself' to see if you find it helpful. As stated, the 'concept' is for those who may not be able to create the same edge angles as a World Cup skier and therefore struggling on ice or extremely hard snow surfaces.
@@sidecuttuning - Thanks for the tip! I use 3° side edge & 0.7° base edge, prob with a degree of burr as I don't use a gummi, and find the sharp compound edge is noticeably dulled after a day on icy snow. Would I be better using a lesser side edge, say like 2°, to produce a more durable compound edge?
@@Benzknees not if you have the skill level and strength to benefit from the 3 degree. It'll hold better on if you can create larger edge angles.
How do you get more of the micro hares out of the base?
Use all brushes and fibertex and most importantly... Wax, ski, wax, ski repeat.
@@sidecuttuningthx for the fast reply!
My process is run 80 grit on the winter Steiger, the 120 lots of water, then depending on the structure or level of tune needed I run through the stone lots of water, then Edges,detune, brush base, little wax remover then dry off and wax, remove elastics strap touchpoints and peace out. 55$ Im the sole tuner in my shop and we have a 1 day turn over. No returns or bring backs. Never knew how much I'd love and feel pride tuning.
Why when the file guide is in my non-master hand & I file I don’t get long strands of filing I get more fine grind & the edge doesn’t seem as sharp?
What do you mean by your “non-master” hand? Best to email so we can help!
So helpful, thank you
Glad it was helpful!
some questions just to make the video more informative: 1) With new skies usually came with some factory wax. Just use your base cleaner is enough? 2) Shoul I use the base cleaner everytime I wax? what is your recommendation on this? 3) Can use the same nilon brush for polishing? or is it necessary something softer?
1) scrape factory wax off 2) base cleaner optional but better to wax and scrape, then re-wax 3) Use brass or soft steel, followed by horsehair and fibre-tex to open the base. Yes you can use the same Nylon brush and follow with a softer Nylon if desired. This is all pertaining to Nanox wax.
This is, hands down, the BEST video on tuning and waxing on the internet. Two thumbs up 👍👍
Thank You very much!! Really great to hear it's helpful to you!!
Hello Would Like to sharp and maintain my base bevel to 0,75 as it is from factory like this . Do you have the tool for it I can see only 1 degré or 0,7 ? Thanks
You would use the 0.7 degree guide.
@@sidecuttuning would it be fine for 0,75 base edge ? I think it will not reach the edge ? Or any kind of technics as the angle 0.75 is more open Thanks for your feedback
@@Steph-iw3hr To know if your base bevel is at 0.75 degrees you'd need to measure. It's very likely the 0.7 degree will work perfectly. This is what we recommend. Hope this helps. For more info email us.
I think a more accurate one is to use feeler gauge and compute the angle.
Yes you can definitely do this as well.
Can I use it for a snowboard or it only works for skies
They work exactly the same on a snowboard.
ruclips.net/video/E0ZBl2-w1Fs/видео.html
Wtf this is severe overkill unless you are some kind of super competitive racer. Most skis are perfect out of the wrapper.
Thanks for your FB! Skis come with a very average tune (out of the wrapper) typically and need to be 'set up' based on ones skill level, strength and the type of ski/skiing you're doing. We believe getting the utmost FUN and PERFORMANCE out of your skis is the goal and tuning is an easy and major contributor to achieving both of these. Give tuning a test...you may never want to ski again without proper tuning.
This is just an advertisement. I wish it explained how to use a file guide.
Damon. Click this link and watch step # 3 of this video: www.sidecut.com/advanced-ski-tuning-videos.html
Can I do the step of fibertex and steel brush if, for some reason, the shop has waxed to me? if there are wax should I use a base glide cleaner instead of alcool and water? Btw, become a sidecut fan, bough the diamond stones and guides and is so high quality!
Great to hear you've become a SIDECUT fan! If there's wax on the base scrape it off, use Fibre-Tex and Brushes, then re-wax. If it's bare, remove any dirt from grinding with the spray and then brush/fibre-tex and then wax. Hope this helps.
Just did my first ever tune using the traveler’s kit and basic wax kit. It really is fool proof, anyone can do it! If you’re hesitant, just go for it!
Thanks for your FB! It really is that easy, more and more people are starting to realize this. Once you start you'll never stop because the benefits are to great vs. not doing it. All the best!
Can you touch on when you would use Ceramic instead of, or in combination with Diamond? Thanks
Watch our 'advanced tuning tips' here: www.sidecut.com/advanced-tuning-tips-videos.html
Hi there - compared to the diamond guides, I know the sidewall remover is less fool-proof. But exactly how difficult is using the tool? Am I likely to mess up my skis? Any suggestions / common mistakes to be mindful of?
Watch our 'How To Tune Your Skis' video Step #3 www.sidecut.com/advanced-ski-tuning-videos.html Then watch the 3 other tuning tips in relation to removing your sidewalls in our 'www.sidecut.com/advanced-tuning-tips-videos.html and our www.sidecut.com/new-valuable-tuning-tips.html No, it's very easy when you follow the advice in those aforementioned videos.
How do you know the diamond stone is worn out?
The first way to know is when it doesn't cut anymore. If you're diamond is clean but won't cut then replace it. Here's how to clean them: www.sidecut.com/product/SEP_15.html
@@sidecuttuning - Couldn't it be not cutting because the edge is case hardened or at a different angle to the angle set on the guide? Are there any visual indicators to look for on the diamond stone to tell you it's time to replace it?
What would be the standard base bevel for an all-around advanced skier and snowboarder? And side edge bevel?
Standard base bevel for skiers is 0.7 degrees typically and 2.0 degrees of side bevel. Snowboards are typically 1.0 or 1.5 degrees on the base edge and 1-2 degrees on the side edges (free-ride that is, not competitive riders).
Is 0° base edge angle on a fis slalom ski doable for a week of freeskiing on unforeseen different conditions (on piste) in your opinion?
No, you'll need a base bevel of your preference. Most likely 0.5 degrees on a SL ski.
But you're not going to change angle with a diamond stone right or do you with a 200 grit diamond for example (for example when speaking about rental skis with maybe a different base edge angle)?
You can change the angle on the base edge with a diamond stone. If this is your goal we recommend a 400 grit stone and finish with 600 or 1000 (if possible) but not mandatory.
Is your intro kit enough to successfully complete all the steps seen here, or does one have to pony up for a lot more kit? I’m a decent skier and want to take my skiing to the next level. I’m a lift operator at Park City, so we get pretty good deals for tunes at a great local shop, but something tells me it can’t touch the eventual knowledge of managing one’s own ski tunes. That said, it’s tough to know if investing all the money it takes to get great gear like you make would be worth it for a noob like me. Either way I appreciate all the work you put into your videos!
The "How To Tune YOUR Skis' video uses only the tools found in our INTRO Tuning Kit the first 3 steps of the video and for Step 4 we use the items found in the 'BASIC Waxing Kit'. If you had these two kit + a set of vices you have everything you need to follow the steps of this video.
@@sidecuttuning awesome, thanks for the response!
Chris, i'm not seeing a 'Cut 2 File' on your website. What file is the equivalent? And is a Cut 2 File the same as a '2nd Cut' file offered by other companies? Thanks
www.sidecut.com/product/FL_WC_BASE_150.html Here's the link to that file on our website.
You guys sell several different fibertex pads; could you give an explanation of when/how to use each one? Enjoy the videos and learning a lot. Thanks.
Maroon = COURSE. 320 grit (removing micro hairs in new skis or freshly ground skis and other base repairs, structuring before and after waxing, sidewalls, topsheet detailing etc. Gray = MEDIUM 600 grit (finer version to the details mentioned with the 320 grit). White = Very FINE No grit (used as a final finish after waxing mostly, any details on the skis that new polishing). Hope this helps.
@@sidecuttuning how does the fine, white fibertex compare to soft brushes/cork. Can you use it instead of a nylon/horse hair brush for polishing? or rather after?
You can use it before and/or after but it's not really a substitute for brushing. We recommend you still brush.@@mmmmkkk
Great video! Best at home tuning video i've seen. For the price the tuning kit is defitnally worth it. Personnaly i wouldn't do the side edge that way, but overall a great tutorial. Gonna check out how to build that bench. Cheers, have a great season.
Thanks very much! We wish you a great season as well!!
Wait, wait, wait. This is not a ski tuning video for anyone trying to tune at home. This guy is using tools that are better than 90% of shops out there. This is high quality race prep. This is not for a diy skier.
Thanks for the feedback. This video is intended for those at home 😊 and anyone who wants a safer more enjoyable experience on-snow. Ski tuning is directly related to improving your skills on-snow and as coaches we want to demystify tuning for people because it's actually incredibly easy with the correct tools and information. Yes, one could say these are the basic steps for a 'race prep' however they are the exact steps done for a recreational weekend skier (minus a few nuances) whose goal is to have more fun and improve their turns. Our sport is so costly that in our opinion most are missing out on SO much when you don't tune your gear. We're here to give anyone interested the confidence and knowledge to DIY. And yes, you're right it can be very tricky to find really knowledgeable ski shops that tune well. However, that has changed a lot over the past few years and if you search a little you can find shops that do really great work. All the best!
Read your reply and re watched your video. I understand you want to sell your product, which looks on point. However you're misleading the viewer with the title. This is not diy unless you have some experience. Do you offer clinics on tunning? If so I'd like to swing by and check out your product.
How have I never heard of you!?! Stuck in the basement inhaling to much ptex smoke I guess. Just checked out your website and I wish the boss would have let me go to SIA back when it was legit. I'm going to still stick by my comments though. Peace
Thanks for the FB. Our four step system has helped many. Yes, we offer tuning workshops for all abilities. In fact, our 'model' has always been based around 'free education'. It's our belief that skiing and boarding are both way more fun when your gear is tuned correctly. PM us if you're interested in knowing more about us and/or our products. It's much easier to discuss on the phone or in-person. @@grujenkins
Ski company quality control leaves a lot to be desired. None of the skis are flat to begin with usually railed tip and tail and a lot of times base high under foot. I find this scenario even on high dollar skis and all brands. Such a rip to the consumer since the race techs pick the best skis out for the pros and the consumer basically gets the seconds
Our opinion is simple - ALL new skis need to be tuned to match the skill, strength and personal preference of the skier to get the most out of them.
I'm trying to figure out what I should buy for a simple kit. Some sites seem to recommend the diamond stone. Some say file. Your site Is the first time that i've come across tyrolfit. If I were to only buy one set to start , which set should I have? Or a mix of diamond and file? I'm gonna have to buy my set up in pieces. I do have a few things already.
Always start with a files and diamond stones first and one gummy stone. You can add the others stones if desired later.
Would these be used instead of a file or diamond stone? If i were to buy one of these for a basic kit which one should i buy? Diamond, ceramic or files?
Electric machines don't replace your hand tools. They are simply another tool that some prefer to sharpen the side-edges on skis and boards. The machine you're referring to comes with a 600 grit stone and that is ALL you need. If you're looking at the Carrot machine we recommend two stones: a 120 grit and the ceramic stone. Hope this helps.
@sidecuttuning I'm so sorry I left this comment under the wrong video! . I meant to write this under the video for tyrolit file.
If I have a new set of skis. How many times can I sharpen them with My Files before It's necessary to cut the sidewall, Generally speaking?
Good question. You need to remove your sidewall (or at least some of it) prior to sharpening. Depending how much sidewall you remove will determine how many times you can sharpen before removing more sidewall. Hope this helps.
@sidecuttuning so you're recommending removing sidewall prior to every true Sharpening? (I assume not when just using diamond stone. Just when filing?)
You remove sidewall if you see the colour of your sidewall on the diamond stone (or any stone) OR in the teeth of the file. You'll need to have your sidewall tool handy ALL THE TIME because you don't want the sidewall to interfere with your ability to get the edge(s) sharp. @@carterfan80
@sidecuttuning thanks. Thats the clearest answer I've been able to get! Videos are great!
Thanks very much. The point really is you need a sidewall remover (you can't do a proper job without one) and you'll use it when needed....which will be a lot!!@@carterfan80
Thanks for these videos. Is it true that brushing with steel or brass will dull the edges somewhat? I typically tune the edges first then wax/brush. Thanks.
Yes it is 'possible' to dull your edges using steel and brass brushes after sharpening depending how hard you push and/or the technique you're using. You could brush with your brass/steel brushes then tape the base prior to sharpening and use only soft brushes after sharpening.....OR if that's not an option you could wax and brush, then tape the base and sharpen after. See our 'advanced tuning tip' specific to this.
Thanks for the quick reply. Advanced waxing tips are hard to come by. I have always tried to sharpen before waxing to keep my diamond stones from clogging up with wax. Speaking of which- any tips for cleaning diamond stones? Thx again. @@sidecuttuning
@@mchristopher Yes we find this the best: www.sidecut.com/product/SEP_15.html edge polish/diamond cleaner.
Adding a small tab on each side with an 8/10mm hole would be perfect. It’d be nice to have this mounted on my workbench for quick access.
Good idea! Have you tried this? Send us a photo if you don't mind.
How wide is the side without the file (facing the hand)? At least in the video it looks like there’s space to put a couple small countersunk holes. I’m in USA, the shipping is as much as the actual unit so I’ll have to wait until I’m ready to buy more tools. I have a mobile tuning shop so I’m starting to get ideas for improving next year’s setup.
Very concise yet detailed guide, the filming and presentation is top notch as well. I noticed there was no use of any ski-specific base cleaners such as Rode Glider Cleaner or Swix Glide Wax Cleaner prior to waxing unlike many other tutorials/clinics. Instead, this guide suggests the isopropyl and distilled water mixture for both polishing and cleaning. The other guides recommend the base cleaner in addition to brushing in order to help the new wax adhere better. 1. Is this lack of base cleaner specific to Nanox, or do you guys find that this solution is sufficient for all waxes when the base is prepared with a brass/steel brushing? 2. Additionally, is there a recommended ratio of the isopropyl solution? Thanks in advance, been really enjoying using the tools.
This is our recommendation as well as Nanox's. For cleaning you can use a mixture high 40% denatured alcohol to 60% distilled water. You can play with the mixture.
Thanks very much for the feedback also.
@@sidecuttuning Thanks for the quick reply (and processing of the recent orders)!
@@RolandYong Of course! Here to help those who want it.
how do you tape snowboards with wider sidecuts
The same way. You're only protecting the base where there is potential wear from the guides/tools.
I accidentally left my retainers on for a week. I feel like the spring has stretched out on my brakes, but I have nothing to compare it to. Is that possible/likely?
No that is not likely. They're up for hours every time you ski.
When do you throw out the gummy stones? can you cut it and use the inside or it's only on the outside surfaces that have the grit?
You can cut them or sand them on fine belt sander.
what kind of tape do you like to use that leaves no residue?
Low adhesive painters tape.
Your arm is covering the screen so I can't see how to use the strap.
👍
yea this is a stupid video